Download Centre
Download the latest release of software for your product,
or the latest version of AudioCore, iCore or SiDD PC Software.
Link to our RSS news feed to remain
up to date at all times with the latest news!
|
|
|
|
| |
iCore
Version 2.00
for Windows XP, Vista & Win7
This software package works with the DC1048 (which does NOT
appear under AudioCore) 4 Series processors, and the MC2 Ti-Series
of network audio components.
Please note that it does NOT support the DP224 or
DP226/6i.
It is required to configure all audio parameters on the DC1048,
manage memories, and set up timed presets (and the clock!).
In addition to this, it integrates the firmware loader to
install new updates for the DC1048, as they become available.
Connection to the DC1048 is either via the front panel USB
socket or as part of a RS485 network, where it will co-exist
with 4 Series, DP224/6 and MC2 Ti components.
A guide to the new features is available here.
To use the USB socket on the front panel, you need to install
the USB drivers - which are available here.
(This is the same link as through the tech support section).
Download
iCore
|
|
iCore software gives the user instant and intuitive control
over all the parameters of a single DC1048 via USB, or a network
of them via RS485. Units appear in a "rack" and
metering of all units is shown in the status window. A quick
click on either the meters or the unit brings it up for editing.
The mixer window accesses the matrix mixing, and main in/out
gain controls, delays, mutes, phase and via three sub windows,
limiters and parameter linkage.
Output PEQ is adjusted in real time via dragging of nodes,
or direct numerical entry if desired. All parameter data can
be copied form one channel, or from an entire device, to another
channel/device. Crossover filters are also defined on this
window, and individual PEQ bands can have their type selected
from a palette of multiple behaviours including standard bell
response, shelving response, notch, bandpass, elliptical (for
use in creating high order roll-off filters) and phase filters.
As well as storage and recall
of presets within the unit(and loading and saving individual
presets as preset files that may be emailed), automated
timed preset recalls can be programmed. These may be one-shot
recalls or scene changes set to happen on a regular basis,
to guarantee your system will be the way you left it the next
day, even if someone has been adjusting things! The clock
and calendar in the unit automatically syncs with the PC's
clock every time you go on-line ensuring everything stays
up to date.
|
|
